- UID
- 1105
- UCC
-
- 声望
-
- 好评
-
- 贡献
-
- 最后登录
- 1970-1-1
|
Cheat Script : Remove Rocks v1.03
What it does:
Enables the quick removal of some or all rocks a sector (or the entire universe)
How to use it:
First off...backup you saved game before running this script. I have had no problems with it but better to be safe than sorry.
1. Open the script editor and select "cheat.removerocks"
2. Run it (press r)
3. Select your ship as the object on which the script will run
4. Select the script mode number (see below)
5. Select the sector which is to be modified
The script will run an atomic loop for rapid removal of the debris (game may appear to lockup for a few seconds)
6. Save the game and exit X3
7. Restart X3 and check the saved game is intact.
Script Modes
The script has three option modes which determine how rocks are removed
Mode 1 : Destroy all rocks - the sector will be completely cleaned
Mode 2 : Destroy small debris - just the more numerous small rocks are removed (types 8, 17, 18, 19 & 20). This option should be used to clear up fragments resulting from combat,
sloppy mining or collisions.
Mode 3 : Destroy 10% of debris - select this for thinning out rocks, repeat as required.
Mode 4 : This removes every single rock in the universe - WARNING! this will lock up the game almost completely for several minutes. While the script is running the autopilot X will appear on your hud. Wait for this to disappear. When you select this mode simply select any sector.
Notes:
If you are in the sector that is cleaned then you will need to exit and reenter it to see the finished result. This is because the graphics card will still represent some debris that has
been removed. This step can be avoided if rock removal is carried out from another sector.
自己觉得矿多了也挺烦的 找了下 居然有 哈哈:lol
但是好象感觉不是很明显 自己用了感觉矿还在 不过碎石好象都没有了
[ 本帖最后由 seacury 于 2007-8-29 17:30 编辑 ] |
|