新的似乎可对接的kosmos套装

zhailingzy

Kosmos Spacecraft Design Bureau     提示非常吃内存……不知道出什么问题……
来自官网的kosmos 套装，从零件名字来看似乎可以分开运送然后组装。
有人愿意跳进去试试么？
（载入变得很花时间……果然游戏引擎还是差了点……）
http://kerbalspaceprogram.com/forum/index.php?topic=7178.0
能看到的人可以去看看……
http://dl.dbank.com/c0bbasdwbc
本体

下面是原作者关于如何让两次发射的东西靠近的操作说明
Low-to-High Transfer   从低轨接近

1) Set your spacecraft in a circular orbit that has an orbital radius of 63% compared to the orbital radius of the satellite you want to meet up.           把你的新飞船射入半径是你目标轨道的63%的轨道
- ex: if the satellite you want to meet has an orbital radius of 12,000,000m, you want your craft to have an orbital radius of 7,560,000m or 63% of the meet-up satellite's orbital radius.   
2) Wait for the satellite, your craft, and the central orbiting body to position themselves, in that order, in a perfectly straight line.   等你的两个飞船和中心天体成一直线（顺序不明）
3) Wait for your spacecraft to complete 1 & 3/4 orbits    等你的新飞船跑1又3/4 圈(应该指的是成一直线之后再跑这么多）
4) Burn in the direction of travel to raise your Apoapsis up to the same level of orbit as that of the Meet up satellite     点火让远地点和旧飞船轨道重合
-ex: if the meet up satellite has an orbital radius of 12,000,000m, raise apoapsis to that same No.     
- For optimal results, do your burn a little early or before you hit 3/4 of that last orbit in step 3   
5) wait again for your spacecraft to reach the other side of its orbit at apoapsis    等新飞船跑到远地点
- From here, your spacecraft should meet up with the satellite   
6) Burn in the direction of travel to make a circular orbit that matches with the satellites circular orbit    点火让新飞船轨道和旧飞船重合
7) Congratz yourself for a job well done!

High-to-Low transfer    从高轨接近

1) Set your spacecraft in a circular orbit that has an orbital radius of 159% compared to the orbital radius of the satellite you want to meet up.         把你的新飞船射入半径是你目标轨道的159%的轨道
- ex: if the satellite you want to meet has an orbital radius of 7,560,000m, you want your craft to have an orbital radius of 12,000,000m or 159% of the meet-up satellite's orbital radius.
2) Wait for your craft, the satellite,and the central orbiting body to position themselves, in that order, in a perfectly straight line.   等你的两个飞船和中心天体成一直线（顺序不明）
3) Wait for the meet up satellite to complete 1/4 of an orbit        等旧飞船再跑   1/4圈
4) Retrograde to lower your periapsis down to the same level of orbit as that of the Meet up satellite    降低近地点到旧飞船轨道（逆向点火）
-ex: if the meet up satellite has an orbital radius of 7,560,000m, lower periapsis to that same No.
- For optimal results, do your burn a little later or after the satellite hits 1/4 of that last orbit in step 3
5) wait again for your spacecraft to reach the other side of its orbit at periapsis   等新飞船跑到近地点
- From here, your spacecraft should meet up with the satellite
6) retrograde to make a circular orbit that matches with the satellites circular orbit       点火让新飞船轨道和旧飞船重合
7) Congratz yourself for a job well done!

我极不擅长这类飞行模拟……希望有人能研究怎么对接……从零件的名字来看有一些是为了对接用的

900009

果然星际旅行的时代要来临了么

deadnessking

这个套装载入速度好慢。。。目前还未成功对接过

zhailingzy

……算了不要试了……我在论坛问了一下，回复是
Docking is coming in 0.15.
大概是版本号吧……我猜……
不过用将来式说明对接的部分还没做……

deadnessking

原来还在开发中啊，那就先放一放了

xiaonemo

留脚印  以后看看进展

davidhawk

茫茫宇宙,没有自动导航设定,手动对接谈何容易;
光发射窗口就选不出来,更何况加速度控制和方向控制....
总之,很难....非常难......

Deltatower

进入对接现在基本没问题...  就差好的东西了...

TimChen

现在整个控制台太简单了，要在太空对接什么的，控制台绝对能能像现在这样靠手动毛估估的控制角度，应该可以直接设定

将记忆，格式化

好东西啊顶一个