大伙，这个连接钢架是否有3米的？[解决]

kspboy

强迫症又发作了，看下图：



连接两组太阳板，如果用2根钢架，太阳板展开位置不足。用三根就又增加了2个零件。


请问这个架是否有3米的版本？谢谢



能否通过修改配置文件把这个架弄成3米的？

wuxianleo

http://kerbalspaceport.com/modular-girder-system-awt/

kspboy

wuxianleo 发表于 2013-9-27 01:13
http://kerbalspaceport.com/modular-girder-system-awt/

非常感谢，这要就可以省些零件了。

mithras

火箭射上去不会断么？

kspboy

mithras 发表于 2013-9-27 11:52
火箭射上去不会断么？

坚着放，不会断。

guitar119121

我記得可以新增一個Cfg檔，
裡面可以設定把原版預設的鋼架多個焊接在一起
成為一整個物件
或許你可以試試。

kspboy

guitar119121 发表于 2013-9-28 02:16
我記得可以新增一個Cfg檔，
裡面可以設定把原版預設的鋼架多個焊接在一起
成為一整個物件

感谢回答，这个太专业了吧，不知是否可以发个参考cfg，看怎么合

guitar119121

kspboy 发表于 2013-9-28 08:46
感谢回答，这个太专业了吧，不知是否可以发个参考cfg，看怎么合

PART
{
name = ubioTrussPiece18x
module = Part
author = UbioZur

MODEL
{
        model=Squad/Parts/Structural/trussPiece3x/model
        position = 0.0, 2.950476, 0.0
        scale = 1.0, 1.0, 1.0
        rotation = 0, 0, 0
}
MODEL
{
        model=Squad/Parts/Structural/trussPiece3x/model
        position = 0.0, 0.0, 0.0
        scale = 1.0, 1.0, 1.0
        rotation = 0, 0, 0
}
MODEL
{
        model=Squad/Parts/Structural/trussPiece3x/model
        position = 0.0, -2.950476, 0.0
        scale = 1.0, 1.0, 1.0
        rotation = 0, 0, 0
}
rescaleFactor = 1

node_stack_bottom = 0.0, -4.425714, 0.0, 0.0, 1.0, 0.0, 1
node_stack_top = 0.0, 4.425714, 0.0, 0.0, 1.0, 0.0, 1
node_attach = 0.0, -4.425714, 0.0, 0.0, -1.0, 0.0

cost = 750
category = Structural
subcategory = 0
title = 3倍長 模塊化樑段XL
manufacturer = MAXO建築產品
description = 現在不只更大！還更長了！
attachRules = 1,1,1,1,0

// --- standard part parameters ---
mass = 1.125
dragModelType = default
maximum_drag = 0.2
minimum_drag = 0.2
angularDrag = 1
crashTolerance = 80
breakingForce = 200
breakingTorque = 200
maxTemp = 5000
}

--------------------複製以上內容並自己新增Cfg檔即可---------------------------

guitar119121

另外貼個迷你版本的
用這造行星探勘車超好用！

-------------------------------------------------part.cfg--------------------------------------------------------

PART
{
name = ubioStrutCube4
module = Part
author = UbioZur

MODEL
{
        model=Squad/Parts/Structural/strutCube/model
        position = 0.0, 0.3862032, 0.0
        scale = 1.0, 1.0, 1.0
        rotation = 0, 0, 0
}
MODEL
{
        model=Squad/Parts/Structural/strutCube/model
        position = 0.0, 0.1287344, 0.0
        scale = 1.0, 1.0, 1.0
        rotation = 0, 0, 0
}
MODEL
{
        model=Squad/Parts/Structural/strutCube/model
        position = 0.0, -0.1287344, 0.0
        scale = 1.0, 1.0, 1.0
        rotation = 0, 0, 0
}
MODEL
{
        model=Squad/Parts/Structural/strutCube/model
        position = 0.0, -0.3862032, 0.0
        scale = 1.0, 1.0, 1.0
        rotation = 0, 0, 0
}

scale = 1
rescaleFactor = 1

PhysicsSignificance = 1

node_stack_top = 0.0, 0.5149376, 0.0, 0.0, 1.0, 0.0, 0
node_stack_bottom = 0.0, -0.5149376, 0.0, 0.0, 1.0, 0.0, 0
node_attach = 0.0, -0.5149376, 0.0, 0.0, -1.0, 0.0, 0

cost = 40
category = Structural
subcategory = 0
title = 4倍 立體方八角支柱
manufacturer = UbioZur Welding ltd.
description = Two Cubic Octogonal Strut welded together. Re-entry heat can melt the weld.
attachRules = 1,1,1,1,0

// --- standard part parameters ---
mass = 0.001
dragModelType = default
maximum_drag = 0.2
minimum_drag = 0.2
angularDrag = 2
crashTolerance = 100
maxTemp = 3000
fuelCrossFeed = True
}

---------------------------------------------一樣自己新增cfg檔並放在part資料夾裡-------------------------------------------------

kspboy

guitar119121 发表于 2013-9-28 09:07
另外貼個迷你版本的
用這造行星探勘車超好用！

感谢了，这个强大呀。

能否注明，哪些参数最核心的呢？